Select a language
English
فارسی
Image 1
Image 2
Image 3
Image 4
  • Kamand

    Kamand

    Delicate, decorative lines drawn between the margin and the edges of a manuscript page. It is drawn around the three edges of the text and not at the edge where the page is folded for book binding.

  • Jadval

    Jadval

    Jadval or “border” refers to the thin lines that surround the four sides of the text and separate it from the margins.  These lines come in different colors and are drawn by metal instruments known as qalam-e jadval (pens used for drawing borders).  Today, a European version of these pens, known as Terling, is used.  The thickness of the lines could be adjusted by turning a screw on the handle of the qalam-e jadval.

  • Illumination Errors

    Illumination Errors

    Since calligraphic work on a manuscript is usually done before any illumination takes place, sometimes illuminators, purposefully or inadvertently, cover up dots or parts of letters with their illumination thus obstructing the text.

  • Omission of Dots

    Omission of Dots

    This piece is unusual because the dots of a number of letters and words were not written.

  • Sharing of Dots

    Sharing of Dots

    The curves or the extended forms of letters in the Nasta‘liq script, when combined with the limited space given to texts in illuminated manuscripts, do not leave enough room for writing all the dots of letters.  Consequently, calligraphers sometimes omit dots or use one dot for two letters.  Here, two examples demonstrate shared dots. 

National Library of Iran, No. 2313.

Text and Margins

The relationship between the text and margin is noteworthy when the paper used for the text and the paper used for the margin are different.

Margins are generally distinguished from the text with thin lines, called borders or jadval.  Depending on the fineness of the manuscript or book, it could have multiple margins of varying colors.  In fine manuscripts and albums, the paper for the text and the margin are usually of a differing type and color.  Sometimes, the text of a book would be written on two pieces of thin paper that were glued together so that there would not be a shadow from the text on the other side of the page.  For this reason, the paper used for the margin of the page would often be twice as thick as the paper used for the text.  When a single page was used to write on both sides, attention would be paid to choosing a paper with similar thickness with the text in order to avoid wrinkles.  

This is usually done when the margin is damaged.  A type of paper would be selected for the margin similar in color and thickness to the paper used for the text.  This way, the book would close flat, and there would not be wrinkles that would allow air to sieve through the pages.

This method of attaching a new margin would have been done with utmost care so that the paper of the text and of the margin were edge to edge and did not overlap.  Usually, the touching edges of the papers were then hidden from view with colored borders.  Because of the considerable degree of expertise and effort required to create these kinds of pages, this technique is found only in the finest of manuscripts or albums.

 

Chalipā

This is a form of writing in which the lettering is not horizontal but written at a 45 degree angle.  It is usually used for writing a couplet or a few verses of poetry in the Nasta‘liq script.

Script: Shakastah Nasta‘liq

Shakastah Nasta‘liq was the third script developed in Iran for writing Persian in the Arabic alphabet.  It was developed under the influence of Ta‘liq and Nasta‘liq in Iran in the seventeenth century in the middle of the Safavid era.

Tazhib

The art of illuminating manuscripts or the borders of calligraphic works is called tazhib.  It is derived from the Arabic word for gold, dhahab, and it usually requires using gold.  Tazhib, however, is not exclusively in gold.  Other colors such as white, red, azure, etc. are also used.  Tazhib drawings, which have a long history, are not naturalistic drawings; rather they are based on the imagination of the artist and are thus regarded as a distinct form of drawing.

Tazhib can be understood as a specific kind of gilding, but there are two ways in which gold was employed in the traditional art of bookmaking in Iran.  In one, gold papers, which were extremely thin and brittle were used to cover all or part of the surface of a page. In the other, gold was used in liquid solutions for drawing or for writing, as in the case of tazhib.  The following is the traditional method used for making gold solutions.  A small piece of gold was placed between two pieces of leather, and hammered for a long time until a very thin layer of gold was produced.  Then, the thin layer of gold was ground in a container with gum arabic or another type of adhesive material that produced a gold solution, which was then used as ink for writing, drawing, or creating borders.